I think I have spotted a typo error regarding the Ground pin and the Voltage pin on the http://wiki.lividinstruments.com/wiki/Brain_v2. The Analog Header section states "You would connect all of the positive (or voltage +) connections to pin one, the ground connections to pin two, and the wiper signal to each analog connections to pin 3, 4, 5, and 6. The remaining four unused connections MUST be grounded by connecting them to pin 1 (ground) or you will have a noisy stream of analog data coming off of those pins. " This statement is confusing because it has mixed up the ground and the Voltage connection pins? Although the POT should still work, it is still a bit confusing. Regards
↧