I have a Minim and have been playing with it ever since I received it. Most of the issues have been worked out except for the following.
1. Disconnecting: I am using the Minim with VDMX & Madmapper. The other night we had a party and the Minim automatically disconnected 3 times during a two hour performance. I had to go back into the Audio MIDI Setup/ MIDI Studio, and reconnect via Bluetooth for it all to get working again. To be clear, I don't have any problems with my 2015 15" MBP and any other bluetooth devices or accessories.
2. Latency: The bluetooth latency on this device can be sluggish at times. I thought it may have been due to the accelerometer, so I switched it off. Nope, it's still not very snappy. This could also lead into my other issue with Sensitivity: When I adjust the sensitivity settings in the minim editor it is almost as if nothing changes. I get better response & sensitivity with a bluetooth keyboard.
3. Accelerometer: In the minim editor when the accelerometer is turn on, even if I set the Minim down on a flat surface and let it sit still, the device is still sending out commands. Between 0-6. When this happens with an iphone, you do the figure 8 to reset the accelerometer, that didn't work for the minim. I am currently keeping the tilt commands off because of this issue.
I would open up a support ticket, but these issues may not be my own.
Computer specs:
OSX 10.10.4
Mid-2015 MBP 15" Retina 16GB DDR3
2.5 GHz Intel Core i7
Broadcom bluetooth
Apple Bluetooth Software Version: 4.3.5f8 15969
Audio MIDI setup version 3.0.6
Minim Bluetooth Data from MBP log:
Livid Minim:
Address: 20-91-48-A9-20-FC
Major Type: Miscellaneous
Minor Type: Unknown
Services:
Paired: Yes
Configured: Yes
Connected: No
Class of Device: 0x00 0x00 0x0000