Ds1 "Changing the velocity max value of the faders"
Hi all, recently i bought my ds1 and testing it for my livesets with Ableton. I have a little question i cant solve reading the manual of the product and the online editor....i am trying to change...
View ArticleBase (original) touch strips
Half the touch strips (channels 5-8, plus the "master fader") are no longer responding to touch on my device. All of the sudden. It seems to be a physical issue since a reset of the firmware did not...
View ArticleLivid Instruments Ohm RGB Midi Controller problems.
My Ohm has just started going crazy today and I have a show next week. None of the lights is working nor is some of the buttons. The ones that do work does the wrong the things.
View ArticleControlling MPC and Elektron Machines with OHM RGB
Hello everyone, I recently purchased an OHM RGB off of ebay in order to create, what I thought would be my dream controller for a live PA setup. Unfortunately the dream has turned into a nightmare. I...
View Articlecolor lens pack
I am searching to buy some extra color lens, but the only site o see is the oficial Shop... I don't have any problem buying at the livid Shop, only the delivery time from Usa to Spain.... Anyone knows...
View ArticleUsing OhmRgb with usb and Midi jack out
Hi,I'm working on a project where I need to control video on a computer and the music on another. So one Mac is wired via Usb and the other via Midi Jack out. In consequence I need to send data over...
View ArticleIR Sensor Sensitivity HELP Please!
Hi all. I am completely new to making MIDI controllers so my language is going to be extremely simple. I have the Brain Jr. and I am making a controller with 3 IR sensors for mapping effects....
View ArticleLivid Block Disable A Knob or Button
Hi! I'm new to the Lvivid Block, and just starting to work with the editor software. Is there a way to disable a knob or a button that I am not using? I don't want to inadvertently send some data I...
View ArticleReplace Brain in Block
Hi! I have a Block from a while back, and I've only just got around to the point of wanting to experiment with Max4Live, but I've recently found there is a real limitation with building for example...
View ArticleOrgan pedals into the brain jr
I'm taking a set of pedals from an old Lowrey organ and trying to set up the Brain Jr. to use the pedals as inputs for a simple bass pedal rig.However, I'm not sure how the Brain should be wired - it's...
View ArticleBrain Jr. Firmware Update not persisting
I followed the firmware update instructions for the Brain Jr., to go from 212 to 213; the update software says it's written and verified, but when I restart the Brain Jr., it reports as v212 again - is...
View Articlecontrolling led strings with the Brain ?
hi everyone! I was wondering if it could be possible to control led strings like these with the Brain and max/msp:...
View ArticleLED brightness / RGB Omni
Hi, the perceived brightness of the LEDs on my Omni RGB boards (driven by a brain v2) is very low - especially when covered with the rubber pads. HOWEVER, when I just updated the firmware I realized...
View Articleohm64 LED's not working on Ableton Live 9.0.1
hi guys and girlsi'm hoping one of you can help me sort out this problem i'm having. that being that the LEDs on my ohm64 (newer metal one) no longer light up when i use ableton live 9i've updated to...
View ArticleBrain V2 Configure / not starting / Max
Hi, my brain v2 configure application stopped working (does not open on start) and the problem cannot be fixed by reinstalling. The only thing changed in the system was that (some time ago) I upgraded...
View ArticleRotary Encoders not working correctly with the Brain V2
Hi there, I'm having difficulties trying to get an encoder to work correctly with the Brain V2. I have tried to follow the guide no the Wiki but are still having difficulties. The encoder has three...
View ArticleDS1 Buttons & LEDs and Ableton Issue
Hi folks,did some research but couldn't find something proper so here is what I am after:I'll use the DS1 for my live set with ableton. On every track I have a filter which I want to have switched on...
View ArticleOhm 64 Some buttons acts like Ctrl instead of Notes
HiI never solved this problem and i start to wonder if there is a problem with my ohm.When using FLstudio i want to use buttons (1-63) to mute/unmute tracks. The problem is that it works fine with some...
View ArticleOhm 64 + FLstudio performance mode
Does anyone tried ? cant manage to make it work :(Tried with the block template , seems to have some reactions but no visual feedback.Thanks for your tips
View Article